Pearl Button - 1

Making a Pearl Button

Here's a solution that uses real magic ... well, almost! We're going to take the glassy button we created in "Making a Glass Button" and turn it into a pearl button.

Solution

  1. Start with the glassy button you created in the solution titled "Making a Glass Button." Change the fill of the button layer to 100%, as shown, and use a very light, "pearly" color for the shape. I've used #fae1f9 for my pink, pearly button.


  2. Enhance the three-dimensional effect of the button by adding a slight inner glow. Double-click on the f icon for the layer to bring up the Layer Style dialog, shown below.

    Select Inner Glow and change the Blend Mode to Normal and the Opacity to 10%. Increase the Size if you need to.

  3. We'll also make the drop shadow a bit more subtle. Select Drop Shadow and decrease the shadow size to 3px or 4px.

  4. Finally, add your text layer. Here we see our final button -- all done!

Making Angled Tab Buttons


In this solution, I'll show you how to use vector graphic tools to create the angled tab buttons illustrated below.

Solution

Angled Tab

  1. Start with a rectangular vector shape in a color of your choice. I've used a light blue in the image below.
  2. Using the Direct Selection Tool (A), select the top left-hand anchor point of the rectangle. Hold down the Shift key and move the point to the right by pressing the right arrow once or twice. Your image should look something like the one below.

    Release the Shift key and use the arrow keys to fine-tune the point. We'll go "old school" here and count the number of times we press the arrow key so that we know how far to move the point on the right-hand side when we get to it.

  3. Repeat step 2 for the top, right-hand anchor point.

That's it -- believe it or not, our angled tab button is complete! If you don't believe me, look at the finished result below.

Cut-corner Tab

  1. This time, we'll make a tab button with a cut corner. Again, start with a rectangular vector shape. Select the Add Anchor Point Tool -- you'll find this in the flyout menu of the Pen Tool (P), shown here.

  2. Add an anchor point to the side of the button as I've done in the example below (you might need to zoom in).

  3. Choose the Convert Point Tool, which is also in the flyout menu of the Pen Tool (P).
  4. Using the Direct Selection Tool (A), click on the top corner anchor point and use the arrow keys to move the anchor point across to form a "cut corner," as illustrated below.

  5. If you like, repeat the effect on the other side.

This entry was written by Damodharan and posted on 1:07 AM and filed under Bookmark the permalink . Follow any comments here with the RSS feed for this post . Post a comment ( in a new window )

0 comments

Make A Comment
Subscribe to: Post Comments (Atom)